1. brian25

    Thread Starter Member

    May 13, 2013
    37
    0
    how to program atmel microcontroller using usbasp but i want to use arduino IDE to make codes?

    tnx
     
  2. kubeek

    AAC Fanatic!

    Sep 20, 2005
    4,670
    804
    Have you read the official page? It says:
    Which means that most likely you will want to use AvrDude to program it. I suggest making a simple bat file to load the firmware in one click.
     
    brian25 likes this.
  3. sirch2

    Well-Known Member

    Jan 21, 2013
    1,008
    351
    I haven't used the USBasp but I use a usbtinyisp a lot. The trick to getting this going was to edit the preferences.txt file and then you can use "Shift+Upload" or the "Upload using programmer" option from the menu - see

    http://www.arduino.cc/en/Hacking/Programmer
     
Loading...