TWI based clarification

Discussion in 'The Projects Forum' started by janu, Jun 25, 2013.

  1. janu

    Thread Starter New Member

    Mar 1, 2013
    9
    0
    Hi.,
    As we want connect the AT32UC3A3 controller and LTC2941 IC using I2C Interface.
    Then we configure that Speed and Address and complete m hardware connection.
    But we cannot able to read the Internal registers exact Values?
    Because we need a 3C value from the Control register but that gives 0X81 only?
    where occurs error?
    please guide me.





    Best Regards.,
    Janaki.S
     
  2. janu

    Thread Starter New Member

    Mar 1, 2013
    9
    0
    Hi.,
    As we want connect the AT32UC3A3 controller and LTC2941 IC using I2C Interface.
    Then we configure that Speed and Address and complete m hardware connection.
    But we cannot able to read the Internal registers exact Values?
    Because we need a 3C value from the Control register but that gives 0X81 only?
    where occurs error?
    please guide me.
     
Loading...