Trying to design a touchscreen system to control lighting and power in the back of my van

Discussion in 'Analog & Mixed-Signal Design' started by jimmyjamms, Sep 21, 2016.

  1. jimmyjamms

    Thread Starter New Member

    Sep 21, 2016
    2
    0
    HI,

    I need some help. I have used this site in the past and always found the answers i need but not this time. I want to control some 12v led lights, and 2 240v drill chargers via a Panel Pilot Ace display (https://goo.gl/ue1Wuw). These are the lights i want to control (https://goo.gl/TDZp9K) and these are the drill chargers (https://goo.gl/oA54nH). Essentially i want to be able to turn the lights on and off. Turn the power to the drill chargers on and off and in an ideal world have a few USB sockets that can be controlled via the same. I have a good grasp on the panel pilot software but the rest is a little beyond my knowledge. If anyone has any idea on how i could make this happen with relays, inverters and a leisure battery i would love to hear some suggestions and maybe a diagram as i am relatively new to all this stuff.
    Thanks in advance
    James
     
Loading...