transistor

Discussion in 'General Electronics Chat' started by theertham, Apr 30, 2012.

  1. theertham

    theertham Thread Starter New Member

    Joined:
    Apr 28, 2012
    Messages:
    26
    in a collector to base bias circuit using pnp BC 558 , what happened if a capacitor of 10pF connected across base and collector ? Rb=1M, Rc= 4.7k, Vcc=9V.
  2. #12

    #12 AAC Fanatic!

    Joined:
    Nov 30, 2010
    Messages:
    9,892
    Location:
    15 miles west of Tampa, Florida
    The highest frequency of amplification will change.

    Where are you getting these questions?
    Is this homework?
  3. theertham

    theertham Thread Starter New Member

    Joined:
    Apr 28, 2012
    Messages:
    26
    this is part of my project.. two stage amplification includes RC coupled amplifier and collector to base bias circuit.. in the collector to base bias circuit , 10 pF capacitor is connected and the output from collector is given to a divide by 10 counter as clock. thats why iam asking the advantage of 10pF capacitor. here frequency will be 40kHz
  4. Audioguru

    Audioguru New Member

    Joined:
    Dec 20, 2007
    Messages:
    9,411
    Location:
    Ontario, Canada
    Your transistor is not biased properly so it probably won't work in your circuit.
Similar Threads
Forum Title Date
General Electronics Chat The transistor and led driver problems. Yesterday at 1:33 PM
General Electronics Chat Collector Resistor for a 2n3904 npn transistor? Sunday at 4:55 PM
General Electronics Chat transistors Dec 8, 2014
General Electronics Chat npn transistors Dec 4, 2014
General Electronics Chat Bipolar transistor short circuit protection circuit Dec 3, 2014

Share This Page