Transformer on Pro-700HD power input

Discussion in 'General Electronics Chat' started by maca_404, Nov 1, 2010.

  1. maca_404

    Thread Starter New Member

    Nov 1, 2010
    8
    0
    Hi

    I have a pioneer pro-700hd rear projection tv and the transformer on the acin board has blown and original replacment is not avaliable here. The transformer says att1281 on it but I cant find any more info. I have a schematic below, the transformer in question is t101 it seems like it might be a 110v to 9v ac but im unsure. Any info that could be provided would be much appriciated.

    http://img594.imageshack.us/img594/6892/pro700acin.jpg

    Thanks
     
    Last edited: Nov 1, 2010
Loading...