Touch switch toggle on / off. Feedback / suggestions welcome.
Attachments
-
214.8 KB Views: 42
-
143.5 KB Views: 48
I didn't realize that an 555 could be configured to do that straight off the bat.Easier version
I'm known to make lots of silly errors in schematics. The prototype was powered from an 9 volt battery. The prototype did not have an relay, just an LED.I couldn't find D2 in the schematic. And what voltage is the Vcc used?
Allen
by Jake Hertz
by Aaron Carman
by Jake Hertz
by Jake Hertz