Through hole mini pcb connectors?

Discussion in 'General Electronics Chat' started by spinnaker, Dec 23, 2012.

  1. spinnaker

    Thread Starter AAC Fanatic!

    Oct 29, 2009
    4,884
    1,004
    Has anyone used these things?

    http://www.ebay.com/itm/2-pcs-Mini-...819?pt=LH_DefaultDomain_2&hash=item2578c5e7db

    From the looks of it, the pins don't look long enough to go through a standard thickness board. I am not certain that "datasheet" tells you the length of the pins.

    I have a bunch of host connectors and they are too short. I don't want to get burned on these too. I realized I really can't use the host anyway.
     
  2. JohnInTX

    Moderator

    Jun 26, 2012
    2,345
    1,026
    According to the dwg, the pins and side tabs are a little over .072" long. That's OK for a .062" plated through hole PCB, maybe a bit short for non plated through.
     
  3. spinnaker

    Thread Starter AAC Fanatic!

    Oct 29, 2009
    4,884
    1,004
    Thanks John. I need to get use to reading those things, of course I would really not know the length I needed anyway. :)
     
Loading...