testing a diode

Discussion in 'General Electronics Chat' started by johndoe45, Mar 18, 2010.

  1. johndoe45

    Thread Starter Member

    Jan 30, 2010
    364
    1
  2. retched

    AAC Fanatic!

    Dec 5, 2009
    5,201
    312
    It depends. If you have an open switch on one side that would isolate it from the rest of the tracks then you can. If not, you will get readings from around the trace loop. If you have no switch, you will have to unsolder 1 end.
     
    johndoe45 likes this.
Loading...