Switch

Discussion in 'The Projects Forum' started by tahir51214, May 11, 2013.

  1. tahir51214

    Thread Starter New Member

    Nov 11, 2011
    29
    1
    I need 2 or maximum of 3 switches in my bread board experiment. In future I may be required more than 3. So should I buy 8 in 1 DIP switches, or separate sets of 3, 4, 5 DIP switches etc keeping economy factor in consideration. Also can I use jumper wire or some other thing instead of switch. Electronics and IC Market is more than 100 miles away. I have to perform logic gates and latches on breadboard. I have all other apparatus.
     
  2. Kermit2

    AAC Fanatic!

    Feb 5, 2010
    3,779
    932
    This is what you need for testing and development. Save the switches for the production run.

    [​IMG]
     
    tahir51214 likes this.
  3. ScottWang

    Moderator

    Aug 23, 2012
    4,853
    767
    This is a better way, because it's more easier to identify the different function of switch, when you do some bigger experiment.

    Also you need to buy some Mini Push Button Switch as this and the centre one of this.
     
    tahir51214 likes this.
Loading...