Suggestions - Twin-T Band Stop Filter + other mods

Discussion in 'The Projects Forum' started by Traverse, Mar 30, 2009.

  1. Traverse

    Thread Starter New Member

    Mar 26, 2009
    Hi there...

    I'm using a Twin-T Band Stop Filter as a mid-range cut. I'm also putting a treble bleed on the same 500k pot to balance the output at lower volumes and a 2000k resistor across the 500k pot as I am using single coils and don't want things too bright.

    I've attached a quick drawing of what I am planning...
    Does anyone have any thoughts or suggestions?
    I'm a Newbie and looking for feedback.

    I used the f-notch = 1/2piRC formula and mapped out values so that I get approx 850Hz frequency cut.

    Thanks for any help anyone can provide.