suggestions for building a wire sorter

Discussion in 'The Projects Forum' started by 1idejim, Feb 17, 2011.

  1. 1idejim

    Thread Starter New Member

    Feb 23, 2010
    14
    0
    a discussion came up about sorting wires (14ga-18ga) in field for irrigation wires due to damage.

    they are commerically available but i would like to build one using a toolbox for the base and plug all of the wires into ports then run the sequence with an irrigation remote control.

    the idea being that a bundle of wires, up to say 45 (the capacity of the remote) could be sorted at one time by assigning each wire a port, when the wire was activated at the controller by the remote an LED would light up at the port and a number could be assigned.

    on a smaller level this is what this sorter does

    input requested, thanks

    sorry for the photo quality
     
Loading...