Hi there, i have a strange problem and ive found lots of similar threads but nothing that really pieces together my issue.
im emulating a 12v DC module that acts as a relay for a very heavy but varying current, (14A) and down to around 7A. the switch gives gives 100 ohms on level 1. and 500 ohms on power level 5. but level 5 should give 12v direct through the relay.
So essentailly i need 500ohms to power the relay directly with 12v and then 100ohms to allow 6v through.
Any ideas would be greatly appreciated.
Thanks
Guys
im emulating a 12v DC module that acts as a relay for a very heavy but varying current, (14A) and down to around 7A. the switch gives gives 100 ohms on level 1. and 500 ohms on power level 5. but level 5 should give 12v direct through the relay.
So essentailly i need 500ohms to power the relay directly with 12v and then 100ohms to allow 6v through.
Any ideas would be greatly appreciated.
Thanks
Guys