STM32F4 Difference between single conversion mode and discontinuous mode.

Discussion in 'Embedded Systems and Microcontrollers' started by tuko maliba, Jul 9, 2016.

  1. tuko maliba

    Thread Starter New Member

    Jul 9, 2016
    3
    0
    Hey,

    What is difference between single conversion mode and discontinuous mode if in discontinuous mode set just 1 conversion.
     
  2. thumb2

    Member

    Oct 4, 2015
    66
    4
    Hi, could you specify de MCU part number or link the data sheet so we can take a look at the specifications ?
     
  3. tuko maliba

    Thread Starter New Member

    Jul 9, 2016
    3
    0
  4. thumb2

    Member

    Oct 4, 2015
    66
    4
    As explained in the reference manual, in continuous mode the EOC flag is set after all conversions are made (so the ADC convert the analog signal from each channel). In discontinuous mode the ADC the EOC flag is set after the analog signal from each group of channels is converted (see example in 13.3.10).
     
Loading...