Software Design for Transformer Protection

Discussion in 'The Projects Forum' started by afiqaris, Mar 21, 2013.

  1. afiqaris

    Thread Starter New Member

    Mar 17, 2013
    18
    0
    i have this question,
    im simulating a software design for transformer protection.
    my circuit consist of AC 240-12V 1A.single phase
    When i insert a load with rated 0.8A,the Tx output gives me +-11.42Vac
    on the other hand,when insert a load of 1.67A,temperature of the Tx rises and Tx output is lower.+-9.12Vac.
    my question is,what is the theoretical explanation behind this tabulated findings.
     
    Last edited: Mar 21, 2013
  2. MrChips

    Moderator

    Oct 2, 2009
    12,449
    3,365
    You just hijacked someone's thread. A mod will come along and move it.
     
    Wendy likes this.
  3. Wendy

    Moderator

    Mar 24, 2008
    20,766
    2,536
    Welcome to AAC!

    As Mr. Chips has said, a thread belongs to the OP (original poster). Trying to take over someone elses thread is called hijacking, which is not allowed at All About Circuits. I have therefore given you a thread of your very own.

    This was split from Question about transformers
     
Loading...