SNR and CNR measurment

Discussion in 'General Electronics Chat' started by engr.izhar, Aug 11, 2014.

  1. engr.izhar

    Thread Starter New Member

    Aug 11, 2014
    2
    0
    I am working on designing modem for satellite com. (950-2150 mhz). I have used MAX2112 direct downconverter. Please help me how to measure digitally SNR and CNR after downconversion (in baseband) by using MCU (any) . let supposed the received power at the anteena is ranging from -60dbm to 0dbm, the frequency of baseband signal is 1 mhz and peak to peak voltage of baseband signal (output from downconverter) is about 1 volt...What Strategy ? which micro-controller ? C code? please help me urgently. Thanks in advance.
     
  2. shteii01

    AAC Fanatic!

    Feb 19, 2010
    3,377
    494
    Do you receive analog signal or digital signal?
     
  3. engr.izhar

    Thread Starter New Member

    Aug 11, 2014
    2
    0
    Analog baseband signal at the input of microcontroller..using ADC feature..like in most PIC controller available.
     
Loading...