I've not used PSpice a whole lot, so I may be missing something here, but this is what I did so far:
I imported the .mod file into pspice (File -> import -> pspice) and have "Consolidate all Schematic files into one Design file" and "Convert to new project type" check boxes checked.
I press okay and i get 0 warnings 0 errors. There are two components in this library now, the FDG6320CN and the FDG6320CP. I place the components and try to run a simple Time domain simulation and I get the response below. Can someone help me to get this simulation file working? You can get the file from their product page here under the models tab.
** Creating circuit file "Generic.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS
*Libraries:
* Profile Libraries :
* Local Libraries :
* From [PSPICE NETLIST] section of C:\SPB_Data\cdssetup\OrCAD_PSpice\17.2.0\PSpice.ini file:
.lib "nomd.lib"
*Analysis directives:
.TRAN 0 1000ns 0
.OPTIONS ADVCONV
.PROBE64 V(alias(*)) I(alias(*)) W(alias(*)) D(alias(*)) NOISE(alias(*))
.INC "..\SCHEMATIC1.net"
**** INCLUDING SCHEMATIC1.net ****
* source NEG VOLTAGE SWITCH
R_R1 N00122 0 1k TC=0,0
V_V2 N001670 0 -3.3Vdc
V_V4 N00520 0
+PULSE -7 0 0 1ns 1ns 5ns 10ns
X_U2 N00122 N001670 N00520 N009263 FDG6320CP
V_V5 N009263 0 0Vdc
X_U3 N01318 N010381 N01262 N010383 FDG6320CN
V_V6 N010383 0 0Vdc
R_R2 N01262 0 1k TC=0,0
V_V7 N01318 0
+PULSE -7 0 0 1ns 1ns 5ns 10ns
V_V8 N010381 0 3.3Vdc
**** RESUMING Generic.cir ****
.END
ERROR(ORPSIM-15108): Subcircuit FDG6320CP used by X_U2 is undefined
ERROR(ORPSIM-15108): Subcircuit FDG6320CN used by X_U3 is undefined
I imported the .mod file into pspice (File -> import -> pspice) and have "Consolidate all Schematic files into one Design file" and "Convert to new project type" check boxes checked.
I press okay and i get 0 warnings 0 errors. There are two components in this library now, the FDG6320CN and the FDG6320CP. I place the components and try to run a simple Time domain simulation and I get the response below. Can someone help me to get this simulation file working? You can get the file from their product page here under the models tab.
** Creating circuit file "Generic.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS
*Libraries:
* Profile Libraries :
* Local Libraries :
* From [PSPICE NETLIST] section of C:\SPB_Data\cdssetup\OrCAD_PSpice\17.2.0\PSpice.ini file:
.lib "nomd.lib"
*Analysis directives:
.TRAN 0 1000ns 0
.OPTIONS ADVCONV
.PROBE64 V(alias(*)) I(alias(*)) W(alias(*)) D(alias(*)) NOISE(alias(*))
.INC "..\SCHEMATIC1.net"
**** INCLUDING SCHEMATIC1.net ****
* source NEG VOLTAGE SWITCH
R_R1 N00122 0 1k TC=0,0
V_V2 N001670 0 -3.3Vdc
V_V4 N00520 0
+PULSE -7 0 0 1ns 1ns 5ns 10ns
X_U2 N00122 N001670 N00520 N009263 FDG6320CP
V_V5 N009263 0 0Vdc
X_U3 N01318 N010381 N01262 N010383 FDG6320CN
V_V6 N010383 0 0Vdc
R_R2 N01262 0 1k TC=0,0
V_V7 N01318 0
+PULSE -7 0 0 1ns 1ns 5ns 10ns
V_V8 N010381 0 3.3Vdc
**** RESUMING Generic.cir ****
.END
ERROR(ORPSIM-15108): Subcircuit FDG6320CP used by X_U2 is undefined
ERROR(ORPSIM-15108): Subcircuit FDG6320CN used by X_U3 is undefined