All About Circuits

Resistor change value

Status
Not open for further replies.
R

Thread Starter

rigers

Joined Jun 14, 2011
20
Hi,

Has anybody encountered a case where after soldering SMD resistors their value somehow changes. I soldered them on different boards with same design and some came out right, most came out wrong. What's going on?

Thanks!
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
D Adjust resistor/capacitor values to supply change (12V to 5V) Analog & Mixed-Signal Design 4
K Resistor change Homework Help 7
S Change resistor inside LED illuminated switch? Analog & Mixed-Signal Design 6
X Bridge Rectifier with Zener Regulator load current doesn't change even when load resistor is replace Analog & Mixed-Signal Design 6
R Resistor change value Analog & Mixed-Signal Design 10
Similar threads
Adjust resistor/capacitor values to supply change (12V to 5V)
Resistor change
Change resistor inside LED illuminated switch?
Bridge Rectifier with Zener Regulator load current doesn't change even when load resistor is replace
Resistor change value

You May Also Like

Top