Repeater for the signals of klikaanklikuit devices

Discussion in 'Wireless & RF Design' started by Citrorob, Feb 19, 2013.

  1. Citrorob

    Thread Starter New Member

    Feb 19, 2013
    4
    0
    Bertus,

    I'm wondering if I could repeat the signals from my Klikaanklikuit with this circuit. I've purchased the one sold by this company but not working properly since it cannot handle all digital signals.


    What I don’t need, that is a device that is actually understanding the signal it just has to receive the signal and recent it with more power.

    Regard,

    Rob.
     
  2. bertus

    Administrator

    Apr 5, 2008
    15,646
    2,345
  3. Citrorob

    Thread Starter New Member

    Feb 19, 2013
    4
    0
    Hi Bertus,

    Yes, it’s this device. It's complete useless. It can only re-transmit signals for the on-off switches but not for the dimmers.I don't use on-off switches..

    For this reason I’m looking for real parrot repeater. Which will just resend what is receiving.

    Best regards,

    Rob.
     
  4. bertus

    Administrator

    Apr 5, 2008
    15,646
    2,345
    Hello,

    The main problem is you can not transmit and receive at the same time at the same frequency.
    The device will receive the on command, puts it into a buffer, and retransmits it.
    There will be a little delay in the action.

    For dimmers there will be signal trains.
    The device can probably not recognize those signal trains and reject them.

    Bertus
     
  5. Citrorob

    Thread Starter New Member

    Feb 19, 2013
    4
    0
    Hi Bertus,

    Is there a way to receive the original signal and resend it e.g. 2 sec later.

    Rob.
     
  6. Citrorob

    Thread Starter New Member

    Feb 19, 2013
    4
    0
Loading...