Reflow oven

Discussion in 'The Projects Forum' started by João Amaro, Oct 5, 2015.

  1. João Amaro

    Thread Starter New Member

    Oct 5, 2015
    2
    0
    Hello guys.
    I'm making a PCB and I will use solder paste and a reflow oven to solder the components.
    My question has to do with the fact that I will also have to solder some vias with a solder iron. Should I solder first with the iron or should I use the reflow oven in the first place? I don't know if the soldered wire will get out in the oven or not
     
  2. kubeek

    AAC Fanatic!

    Sep 20, 2005
    4,670
    804
    If you mean soldering a piece of wire inside through hole, then it will most likely fall out.
     
  3. João Amaro

    Thread Starter New Member

    Oct 5, 2015
    2
    0
    Yes, that's it. I will solder it after then.
    Thank you
     
Loading...