Read data coming from an ethernet port.

Discussion in 'The Projects Forum' started by Thilini, Nov 19, 2009.

  1. Thilini

    Thread Starter New Member

    Nov 19, 2009
    I have to write a program using matlab, to read the data coming from an ethernet port. pls help me.
  2. Duane P Wetick

    Active Member

    Apr 23, 2009
    From the EIA standard T568A & T568B, you typically have 2 transmit lines Tx+ & Tx- and 2 Receive lines Rx+ and Rx-. These are the data lines, and you have to know what standard you are using, A or B, because the connections are different. Does that help?

    Regards, DPW