RC receiver to DC Motor servo controller board?
Is there a ready-made position servo controller board which can be controlled using an RC receiver output? (Think of substituting a BIG servo DC gearmotor for a typical RC model servo).
Ideally, it would work with a 12V 6A reversible DC gearmotor on the back-end. The commanded position information would come from the pulse train out of the RC receiver. Position feedback of the servo shaft from pot or optical encoder?
Ideally, it would work with a 12V 6A reversible DC gearmotor on the back-end. The commanded position information would come from the pulse train out of the RC receiver. Position feedback of the servo shaft from pot or optical encoder?
