RC CAR (Parallel port interfacing ):

Discussion in 'The Projects Forum' started by noor22, Dec 4, 2012.

  1. noor22

    Thread Starter New Member

    Oct 11, 2012
    19
    0
    hi

    i want ask about this project " RC CAR controlling with Parallel port"
    see this link i made same project,i knew there is many type of remote and the remote in this project very clear and there are 4 switches and connect 5 wires in each button , but right new i have different remote there is one switch inside how i can work in this remote i means how to connect four wire in one switch
    http://www.instructables.com/id/RC-...rfacing/step2/Getting-started-Hardware-phase/[^]

    this is my remote from behind
    http://im20.gulfup.com/VQJ41.jpg[^]

    http://im14.gulfup.com/Y6wh2.jpg[^]


    also i have another remote i think there are four switch but i'm not sure
    if this remote 4 button can you explain how to connect 4 wires
    http://im28.gulfup.com/jLRV2.jpg[^]

    remote from behind
    http://im20.gulfup.com/XkL32.jpg[^]




    help me if you knew ^_^ i'm waiting for all
    thank you
     
  2. noor22

    Thread Starter New Member

    Oct 11, 2012
    19
    0
    Finally concluded from the building circle and the program runs but the problem
    with parallel port it's working without run the program but the led must be off until i press the key and the program show the pin2 is activity and led that connected with pin 2 from LPT glow \
    Any one can help me
     
  3. NFA Fabrication

    Member

    Aug 12, 2012
    104
    3
    This is one of those things where non-clear english makes this borderline pointless. Not a single clue as to what you are trying to get across.
     
Loading...