i've bought a TX and RX module.. TX have chip TDA5210 and RX K110.. its is FSK RF module.. here's the picture and the specifications..

http://alexan.com.ph/images/large/rf_fsk.jpg

Features:

Low Power Consumption for 5V±0.5V Operation
Designed for 434/868MHz communication systems
FSK Modulation/Demodulation
Low Spurious Noise
Data Rate of 20Kbps/TX, 4.8Kbps/RX typical
Dimension (Tx: 16.8x12.x2.4mm; Rx: 44.2x13.1x5.3mm)

http://img545.imageshack.us/img545/466/fskw.jpg

just want to ask if this module is capable of UART.. i want to implement this on my project design..

 

Try the data sheet for that information - http://www.datasheetcatalog.com/datasheets_pdf/T/D/A/5/TDA5210.shtml

 

Try the data sheet for that information - http://www.datasheetcatalog.com/datasheets_pdf/T/D/A/5/TDA5210.shtml

to tell you honestly i don't know how to read those datasheets.. i dont know if it is capable of UART transmission..

and just wanna ask if i can apply this in sending packets..

 

The TDA5210 only has a data out pin. A UART is a bit more complicated - http://en.wikipedia.org/wiki/Universal_asynchronous_receiver/transmitter