question about component placement

Discussion in 'The Projects Forum' started by poolman966554, Feb 22, 2014.

  1. poolman966554

    Thread Starter New Member

    Jan 22, 2014
    hey all, im working on putting together a rohm BH1417 fm transmitter, and was curious about the placement of the caps to ground on the +5v line. Do they have to be in order?
    What i mean is, do i have to have the two 10uf caps to ground before i can take power to the four 10k resistors? and then a 10nf before i can take line to pin 8?

    Sorry for the silly question. Thanks

    Edit: im powering from 6v battery, so no reg, or diodes are being installed
    Last edited: Feb 22, 2014