PsPice Less than two connection at output

Discussion in 'General Electronics Chat' started by chess2009, Jun 20, 2015.

  1. chess2009

    Thread Starter New Member

    Jun 19, 2015
    4
    0
    Hi
    I am modeling a circuit by PsPice to find the transfer function but it is giving an error message :
    upload_2015-6-20_14-20-26.png my circuit looks like below
    upload_2015-6-20_14-22-24.png

    I would be very thankful if anyone tells me how to fix this issue ?
     
  2. crutschow

    Expert

    Mar 14, 2008
    13,000
    3,229
    The simulation doesn't like an open circuit output from R2.
    Add a 10 megohm resistor from Vout to ground.
     
    chess2009 likes this.
  3. Alec_t

    AAC Fanatic!

    Sep 17, 2013
    5,779
    1,103
    Do the lines at the C1/ground point actually connect, or merely cross over?
     
Loading...