PSpice gate driver TC428 help

Discussion in 'Electronics Resources' started by classd, Jun 8, 2009.

  1. classd

    Thread Starter New Member

    Jun 8, 2009
    2
    0
    Hello everyone,

    I am using a gate driver(TC428) in a schematic I created and during simulation the specific part number mentioned above does not appear on the netlist. I uploaded the screen shot of the error message, netlist, and the schematic.

    Thanks in advance,
    Ron John
     
  2. SgtWookie

    Expert

    Jul 17, 2007
    22,182
    1,728
    Orcad is complaining that N08485 is floating.
    That node is the + side of C7. Apparently, you didn't draw the wire from the output of the TC428 to the + side of C7 in a manner where the wire connected the components.

    Try deleting that non-connecting wire, and re-draw it.

    Displaying nodeIDs (if you can) will help in the de-bugging process.
     
  3. classd

    Thread Starter New Member

    Jun 8, 2009
    2
    0
    Hi SgtWookie,

    Do you know where I can obtain the library for irf730 and tc428? I know that irf730 is in pwrmos.lib but I am unable to find that specific library. Same goes with tc428, I am unable to find the library for simulation purposes.

    Thanks,
    classd
     
  4. SgtWookie

    Expert

    Jul 17, 2007
    22,182
    1,728
Loading...