PSPICE- Full Bridge Rectifier Model

Discussion in 'Electronics Resources' started by Ziin13, Mar 5, 2013.

  1. Ziin13

    Thread Starter New Member

    Mar 4, 2013

    I am working on my PSPICE project that need a full-bridge-rectifier in the circuit. I found out several components in "discrete" library like BRIDGE, BR805D,....but none of them works in my circuit.

    Whenever I ran the simulation, this error pops up: " No PSpiceTemplate for D1".

    I have spent plenty of time searching for the solution, but its still not moving. Please give me some hint if you see this error before.

  2. StayatHomeElectronics

    Well-Known Member

    Sep 25, 2008
    Try looking for a diode bridge part in library/pspice, ie. sometimes the libraries do not have a pspice models associated with them.

    If you are just looking for a functioning circuit then you can also build the diodes bridge out of four diodes.
  3. Ziin13

    Thread Starter New Member

    Mar 4, 2013
    Thank for your reply.

    I try the BRD in the library of pspice, but I believe they dont have the template model associated with them.

    At the end of the world, I will build of the 4 diodes combined..jk.. I am working on it now.