Projects

Discussion in 'The Projects Forum' started by ect_09, May 6, 2012.

  1. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    i want to make project of analog digital communication (ADC)
    plz tell me project names..
    that suits this subject
  2. tracecom

    tracecom Well-Known Member

    Joined:
    Apr 16, 2010
    Messages:
    3,296
    Location:
    West Tennessee
    ADC often stands for Analog to Digital Conversion. Is that what you mean?
  3. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    no no
    its analog digital communication.
    its related to communication
    e.g FM,AM communication
  4. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    any1 is there?
  5. wayneh

    wayneh AAC Fanatic!

    Joined:
    Sep 9, 2010
    Messages:
    8,143
    Location:
    Roscoe, IL
    We're here, but no one understands what you need.
    strantor and KJ6EAD like this.
  6. BSomer

    BSomer Member

    Joined:
    Dec 28, 2011
    Messages:
    433
    Location:
    Omaha, NE, USA (GMT-6)
    So you want a schematic for a radio receiver or transmitter? Or do you want something else? Perhaps a little more explaination of what you would like or what you are trying to do will help the members of this forum to give you more assistance.
  7. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    i want to make something like receiver transmiter
    but dnt want to make AM FM receiver transmiter
    i want other than these e.g WAP ,Bluetooth etc
    but cost should be minimum
    plz help me
  8. wayneh

    wayneh AAC Fanatic!

    Joined:
    Sep 9, 2010
    Messages:
    8,143
    Location:
    Roscoe, IL
    Like a walkie-talkie?
    Soooo, you don't want to modulate either the amplitude or the frequency. How exactly do you intend to send a signal if you cannot modulate either?
    Those are digital protocols on top of the actual radio transmission. What DO you want to send? How far?
    Do you have a budget? People rarely want the maximum cost.
    Besides wishing you luck, I don't know how.
    DerStrom8 likes this.
  9. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    ooooooooooooppp! you seems to be got anger.
    finally i decide to make AM receiver.
    and i need somp help..
    is it clear now............
  10. DerStrom8

    DerStrom8 Well-Known Member

    Joined:
    Feb 20, 2011
    Messages:
    1,978
    Location:
    Vermont, U.S.A. (GMT-5)
    No anger there. You're just not making any sense :p Vague posts receive vague answers. That's something you should always remember.

    AM receiver
  11. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    but i also want to get help about WAP and bluetooth.
    the mechanism and their working + schematic
    m student so love to learn thats y i join this site
    hope full that it will be helpful for me.
    thnx
  12. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    sorry
    actually m new on this site..
    so, m not familiar with this site rules and regulation.
    but i looked that this site is very good for student.
    as they helped my class fellows in different project
    great..!
  13. DerStrom8

    DerStrom8 Well-Known Member

    Joined:
    Feb 20, 2011
    Messages:
    1,978
    Location:
    Vermont, U.S.A. (GMT-5)
    Back to your original question though, Analog and Digital are basically opposites. You cannot have an Analog Digital communication device unless it employs both types of transmission. An ADC is an analog-to-digital converter, as tracecom said. It does not stand for analog digital communication.
  14. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    i want block diagram
    i can use this search bt............
    i want to understand under the supervision of u people.
    its not good.
  15. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    yes...u r ri8
    its not ADC
    its analog digital communication.
  16. wayneh

    wayneh AAC Fanatic!

    Joined:
    Sep 9, 2010
    Messages:
    8,143
    Location:
    Roscoe, IL
    +1
    No anger, just confusion. I still have no idea what you want.

    I very strongly recommend you use tools like Google, Wikipedia and many others (including the references at this site) to read as much as you can on WAP, bluetooth, and whatever topic interests you.

    You will find a lot of helpful people here but the questions need to be specific. You will get much better help when you show that you have first done work yourself.
    DerStrom8 likes this.
  17. DerStrom8

    DerStrom8 Well-Known Member

    Joined:
    Feb 20, 2011
    Messages:
    1,978
    Location:
    Vermont, U.S.A. (GMT-5)
    It would also help if you ask your questions in real english, not SMS speak. I can't understand half of what you're saying. If you can't speak english very well, try a translator service. Depending on your nationality, translate.google.com might work fine.
  18. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    basically we demodulate the modulated signal on receiver .
    it can be done by generating local carrier of same frequency as in modulator
    and then the product of local carrier and incoming signal is passed through low pass filter.
    in my search i found this mechanism..
    am i right??
  19. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    another technique is also use
    that you can transmit the modulating signal along with with the carrier
    if you don't want to generate the local carrier on receiver end.
    i studied and i learn these..
  20. ect_09

    ect_09 Thread Starter Member

    Joined:
    May 6, 2012
    Messages:
    153
    anyone is there?
Similar Threads
Forum Title Date
The Projects Forum Ideas for projects with some parts I found Jul 17, 2014
The Projects Forum Projects with TIP31 and TIP32 Feb 13, 2014
The Projects Forum URGENT : looking for some PLC/uC based CNC projects ideas Dec 13, 2013
The Projects Forum pspice projects May 5, 2013
The Projects Forum Ideas for projects with microcontrollers? Apr 20, 2013

Share This Page