Projector LED Bypass

Discussion in 'General Electronics Chat' started by modi2, Sep 27, 2016.

  1. modi2

    Thread Starter New Member

    Sep 21, 2016
    I am working on a DLP 3D printer and I use a UC50 Mini projectore as the UV engine, to modify it, LEDs of the original projector must be disabled and feed a UV LED in the light channel. the issue I have is if one the original LEDs be removed, the projectore can not boot. Is there any way to help me to bypass the LEDs? I am totally newbie in electronics however there are other peoples that working in same thing and almost have some progress by replacing LEDs to Resistance.
    Any help and Idea is welcome.

    1.JPG 2.JPG 3.jpg 4.JPG 5.JPG 6.JPG 7.JPG 8.JPG

    Thanks all.