Project: "Lynx" 2-way speakers

Discussion in 'The Completed Projects Collection' started by cumesoftware, Jun 20, 2010.

  1. cumesoftware

    Thread Starter Senior Member

    Apr 27, 2007
    1,330
    10
    List of components:
    C1 – Capacitor Visaton MKP 10µF;
    C2 – Capacitor Visaton MKT 22µF;
    C3 – Capacitor Visaton MKP 4.7µF;
    C4 – Capacitor Visaton MKP 15µF;
    FTE1 – Woofer Visaton SC 13 8 OHM;
    FTE2 – Tweeter Visaton SC 10 N 8 OHM;
    L1 – Coil Visaton SP 0,68mH 1mm;
    L2 – Coil Visaton SP 0,22mH 0,6mm;
    L3 – Coil Visaton SP 0,33mH 0,6mm;
    R – 8,2Ω wirewound resistor (5% tol., 15W).

    Electrical parameters:
    - Pnom = 100W
    - Ppk = 150W
    - R = 7,5Ohm
    - Znom = 8Ohm

    Audio characteristics:
    - Frequency response (-10dB): 32-30000Hz
    - Sensitivity (1W/1m): 90dB

    Recommended enclosure specifications:
    - Type: Ported (3th order quasi-Butterworth alignment)
    - Volume: 51.13L
    - Recommended duct: Monacor BR-70HP (length: 102mm)
    - Resonant frequency (Fb): 38.37Hz
    - -3dB frequency (F3): 44.76hz
     
    Last edited by a moderator: Dec 27, 2011
  2. bertus

    Administrator

    Apr 5, 2008
    15,648
    2,347
    Hello,

    Are you also planning for drawings of the enclosure?
    This would be a good addition to the project.

    Bertus
     
  3. cumesoftware

    Thread Starter Senior Member

    Apr 27, 2007
    1,330
    10
    Indeed! I'm planning to upload the enclosure project in 3D, as soon as possible.
     
  4. cumesoftware

    Thread Starter Senior Member

    Apr 27, 2007
    1,330
    10
    Is it possible for a mod to change the title to "Project: "Lynx" 2-way speakers" ?

    Thanks in advance!
     
Loading...