problem with generating pulses for cycloconverter using interrupt (atmega16)

Discussion in 'Embedded Systems and Microcontrollers' started by Thrishool Gudelli, Sep 2, 2016.

  1. Thrishool Gudelli

    Thread Starter New Member

    Jul 3, 2016
    i am using atmega16 for generation of pulses for cyclocoverter. A external interrupt is used for detecting zero crossing point.
    i am able to generate single pulse after detection of zero crossing point. facing problem in generating pulses from other ports for every detection of zero crossing point ,how do i program it for generation of pulses.i need each one of four ports to generate pulse for every zero crossing point.