Problem trying to analyze simple amplifier circuit on

Discussion in 'The Projects Forum' started by photowriters, Apr 18, 2016.

  1. photowriters

    Thread Starter New Member

    Apr 12, 2016
    I've just gotten started using Do for designing and testing circuits before committing them to hardware, and I have run into a snag. I have a simple one transistor circuit designed to raise a 60mV audio signal to a maximum of 600Mv that should be measurable on an oscilloscope but the scope shows nothing.

    I really need some help from someone who uses frequently. seems to work very well, but I have this one stumbling block on the learning curve, and there is no fourm attached to the web site.


  2. AnalogKid

    Distinguished Member

    Aug 1, 2013
    40 people have looked at this and not responded. No schematic, no answers.