Problem in Flyback Transformer

Discussion in 'General Electronics Chat' started by shom_show, May 18, 2013.

  1. shom_show

    Thread Starter New Member

    Sep 4, 2010
    15
    0
    Hi friends,

    I am trying to design a Flyback converter(Vin=15 volts, Vout=15 volts, fsw=140kHz) in general purpose PCB. The Mosfet(IRF510) is being driven from TL494. I have checked that the mosfet is being successfully driven by TL494. But after connecting the transformer(E 16/7/6) in sec side, I observed some notches for usec duration instead of a square wave voltage. I have checked the xformer separately after winding it by giving signal from a SIGNAL GENERATOR, where the output is coming correctly.
    Can anyone suggest me any tests that can be done to sort out the cause of the xformer malfunctioning, which will be of great help to me.
    Thanks in advance.

    Sumanta
     
  2. kubeek

    AAC Fanatic!

    Sep 20, 2005
    4,670
    804
    Start by posting your schematic and scrrenshot of the waveform adn where and how you measured it.
     
  3. shom_show

    Thread Starter New Member

    Sep 4, 2010
    15
    0
    Thanks for the information. In the next post I will attach the image of the hardware ckt.
     
Loading...