Powercell/myGrid charging Android 7" Tablet

Discussion in 'The Projects Forum' started by StealthRT, May 6, 2011.

  1. StealthRT

    Thread Starter Active Member

    Mar 20, 2009
    I am looking at the idea of installing a reciever on an Android tablet so that i can lay it down in order to charge it up

    I am looking at this tablet here http://www.euogo.com/new-g10-haipad...i-touch-screen-accelerometer-camera_p384.html

    According to the sheet information for that tablet it uses a 3000mA/7.4V high cap rechargable battery.

    The Adapter is a DC/9V 1.5A.

    Since the powercell has receivers for mostly cell phones, i take it their max volts output is ~5v? But i also noticed that the powermat mat itself is 18v.

    Is there anyway to use the receiver on the tablet since the tablet takes 7.4v and the receiver is ~5v (guessing)?

    I just found another Android tablet that may end up working better: http://www.euogo.com/7-inch-rockchip...port_p424.html

    The specs on that one is:

    Battery capacity: 3000mHA
    Input power: Input 5V 2A

    Maybe that will work without the need of modifying anything???