power supplied and absorbed by each source

Discussion in 'Homework Help' started by blend, Oct 23, 2010.

  1. blend

    Thread Starter New Member

    Oct 23, 2010
    2
    0
    I want to know if the currents Io and I1 i got are correct or not please
     
  2. The Electrician

    AAC Fanatic!

    Oct 9, 2007
    2,281
    326
    You must be taking the same class as Tanzer1234. See the advice I offered him.
     
  3. blend

    Thread Starter New Member

    Oct 23, 2010
    2
    0
    Actually i am, but we are only allowed to use KVL and KCL in solving this problem, we are not allowed to use mesh method to solve this problem :mad:
     
  4. The Electrician

    AAC Fanatic!

    Oct 9, 2007
    2,281
    326
    The mesh method is the use of KVL.

    See: http://www.allaboutcircuits.com/vol_1/chpt_10/3.html

    Looking over your work, I see that one mistake you are making is to represent the value of the 200 mA current source as 200 in your calculations. All of the rest of your calculations are in amps, not milliamps, so you should use .200 for the value of that current source.
     
Loading...