plz help me design this. specially indians.

Discussion in 'General Electronics Chat' started by fahim maan, Aug 16, 2008.

  1. fahim maan

    Thread Starter New Member

    Aug 16, 2008
    1
    0
    design a close circuit like
    vco(output 10ghz)>frequency divider(output1 ghz)>PLL>bandpass filter(output back to vco at 10ghz.)
    plz give me idea or circuit sort of thing.
     
  2. SgtWookie

    Expert

    Jul 17, 2007
    22,182
    1,728
    There are already ICs out there capable of operation at those frequencies.

    http://rfdesign.com/military_defense_electronics/news/mmic_vco_tunes/
    http://www.hittite.com/
    http://www.hittite.com/products/index.html/category/60

    Now, the /10 output may be dicey.

    Trying to design the whole circuit from scratch on this forum is not terribly likely to succeed. While there are a number of professional engineers and highly experienced people on board, attempting to develop something at these frequencies will require quite a bit of effort as well as experimentation.
     
  3. Audioguru

    New Member

    Dec 20, 2007
    9,411
    896
    Maybe the question should be asked on a forum in India??
     
Loading...