Guys i'm new to building circuits so please bear with me.

What I'm looking at is a multi function LED tail light. Useing all LED's I have a 4 wire input. Tail, Brake/Turn, Reverse and Ground. I'm am trying to find a 6v Regulator that will pass separate current paths so that I can make the multi function aspect work with parallel resistors for the Break/Turn function making it brighter than the tail light function. as well as the Reverse function havin its own as well. I'm hoping to find a way to use just one Voltage Regulator.

I hope this is clear enough.
Any help would be great

Jeremy

 

Sorry, those kinds of topics are not up for discussion.

Read here:
Automotive Guidelines

 

Hello,

Sorry, I have to close this thread.

2. Any homemade wiring modifications to signal or head lighting, or penetrations through the fiewall are not for discussion. The lighting function is to too critical for non-approved wiring and connectors. Many safety issues are involved. Preventing chafing in wires passing through driver-made holes is impossible to guarantee.

Bertus