Colleagues,

There's a host of nice LCDs out there, but I'm floundering trying to pick the one to work with. All I want to do is to be able to display colored text. My system will be based on LPC2129 or similar.

This one came close, but it's a bit small. http://www.crystalfontz.com/product/CFAF320240F-T. What's nice about it is that it can be connected to uC through SPI. If it were 240x320 (portrait orientation) and if it were 4 inches wide (about 100mm), it would be perfect.

I would appreciate and suggestions or insights!

- Nick

 

I'm Using Microchip Graphic display library. I don't known if your display is supported from the library. If you known "C", it's simple use and there are already some working examples software.

http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2608&page=1&param=en532061

Colleagues,

There's a host of nice LCDs out there, but I'm floundering trying to pick the one to work with. All I want to do is to be able to display colored text. My system will be based on LPC2129 or similar.

This one came close, but it's a bit small. http://www.crystalfontz.com/product/CFAF320240F-T. What's nice about it is that it can be connected to uC through SPI. If it were 240x320 (portrait orientation) and if it were 4 inches wide (about 100mm), it would be perfect.

I would appreciate and suggestions or insights!

- Nick