I have inverter circuit but when i simulate it with OrCAD, i got ERROR-(1017)-unconnected pin error-no float property or float. How can i fix this problem ? Is there any fix for issue ? You can see the green pins giving an error. Pls help. Thnx.

 

place the "no connect" icon on that pin

 

still giving that error.

 

connect the pin to ground node or
edit the part and set it to power pin and invisible
or can you select float to unique net

 

Connecting the pins to ground gives an error during simulation in Pspice. I can set the pins as no connect but nothing changes. I cant set them as power pin. Its locked. I dont know how to set them to unique net. Thnx dude.

 

Connecting the pins to ground gives an error during simulation in Pspice

what error does it give?

 

When these pins are set as no connect:

When these pins are set to ground:

 

Maybe you have another page in your project and it isn't conected of all, even though you haven't opened, and you have pins without connect, and it's the reason of your problem. It happens to me.