Hi everyone, i have a problem trying to simulate a circuit in Pspice, any idea?

**** 06/24/15 12:45:33 ********* PSpice 9.2 (Mar 2000) ******** ID# 1 ********

** Profile: "SCHEMATIC1-Pru" [ c:\users\asus\desktop\prueba\prueba-schematic1-pru.sim ]


**** CIRCUIT DESCRIPTION


******************************************************************************




** Creating circuit file "prueba-schematic1-pru.sim.cir"
** WARNING: THIS AUTOMATICALLY GENERATED FILE MAY BE OVERWRITTEN BY SUBSEQUENT SIMULATIONS

*Libraries:
* Local Libraries :
* From [PSPICE NETLIST] section of C:\Program Files\Orcad\PSpice\PSpice.ini file:
.lib "nom.lib"

*Analysis directives:
.OP
.PROBE V(*) I(*) W(*) D(*) NOISE(*)
.INC ".\prueba-SCHEMATIC1.net"



**** INCLUDING prueba-SCHEMATIC1.net ****
* source PRUEBA
V_V1 B 0 6Vdc
R_R1 B A 2k
R_R2 N00556 A 2k
R_R3 0 D 2k
R_R4 N00354 N00556 1k
R_R5 N01894 0 1k
X_F1 A D 0 N00354 SCHEMATIC1_F1
E_E1 A B N01894 N00354 1.4142135623730950488016887242097

.subckt SCHEMATIC1_F1 1 2 3 4
F_F1 3 4 VF_F1 1.4142135623730950488016887242097
VF_F1 1 2 0V
.ends SCHEMATIC1_F1

**** RESUMING prueba-schematic1-pru.sim.cir ****
.END

ERROR -- Less than 2 connections at node N01894


and this is the circuit

Thanks for your time

 

I guess you will have to find out which node is N01894

 

this...

so i don't know whats the problem

 

Are you sure that E1 is properly connected? You could try for example adding a 1e9 or similar value resistor going to ground and see if it helps.

 

I'll try thanks

 

I see more basic problem with this circuit. You have named same net (right to R1, on top) twice. A single net cannot have 2 names. Right ?
I think if you rectify this, your original problem could be solved as well.

 

ohhh i hadn't realised thank you so much