when biasing a guitaramp see post below, i accidentally shortend two points.
and now the anode voltage on my tubes is 560V , i traced the wires that i shortende and they came from the output transformer. is there a way of checking if he is all right. and what could be other problems?
i rechecked with another meter and now erverything is ok??
and now the anode voltage on my tubes is 560V , i traced the wires that i shortende and they came from the output transformer. is there a way of checking if he is all right. and what could be other problems?
i rechecked with another meter and now erverything is ok??
Last edited: