newby problem: different amount of pins on a transformer

Discussion in 'General Electronics Chat' started by phantom trigger, Nov 20, 2013.

  1. phantom trigger

    Thread Starter New Member

    Aug 14, 2013
    2
    0
    Hey guys, i'm building this reamping box but buying the parts listed in this kit separately (they don't make the kits anymore) http://www.diyrecordingequipment.com/4085/how-to-build-diy-reamp/#schematic

    I'm in australia and i want to buy a transformer without getting the one they specifiy from the U.S.

    The transformer they listed appears to have 8 pins but they only use 4 in building the reamping box:



    an equivalent i found to buy in australia is this one
    600 Ohm : 10k Ohm Bridging Input Transformer: http://www.altronics.com.au/index.asp?area=item&id=M0712

    but it appears to have 5 pins on the schematic, if that's what the dots are...i was wondering if this could cause a problem? Thanks heaps guys for your help
     
Loading...