Newbie Needs light controller power circuit help

Discussion in 'The Projects Forum' started by epixels, Jan 4, 2009.

  1. epixels

    Thread Starter New Member

    Jan 4, 2009
    2
    0
    i have a 20 year old lighting controller foot pedal that is missing the power cables and the power strips and I want to make new ones for it. (It's so old there are no references on the web other than the user manual.)

    I don't really know anything about circuits but from what I've read it seems these must be wired in parallel - one light should be able to burn out without the others going out.

    i've made a diagram showing the components and the existing power socket wiring on the inside of the controller. Can anyone show me how to wire the power bars

    Thanks in advance for looking and sorry for the layman's diagram...
    Vic
     
  2. Bernard

    AAC Fanatic!

    Aug 7, 2008
    4,170
    395
    Check to see if white 1 and white 2 are common. The remainder is guesswork includong pin numbers.
     
  3. epixels

    Thread Starter New Member

    Jan 4, 2009
    2
    0
    Great... I'll test the whites first... Thanks so much for taking time to respond.
     
Loading...