need the help in hardware for solar MPPT using perturb and observe

Discussion in 'The Projects Forum' started by sudheer9133, Jun 15, 2011.

  1. sudheer9133

    sudheer9133 Thread Starter New Member

    Joined:
    May 19, 2011
    Messages:
    4
    hi

    im doing the project on MPPT for solar cells using perturb and observe method . in this im using the 12v solapanel and it has 0.4 amp current . i m boosting the voltage to 24 v . i had taken the 30mh inductor and 0.01 pf capacitor and the mosfetswitch which is controlled by the PIC 18F2550 micro controller. i want to control the switching by duty cycle.

    im not geting the 24v at the output....im very poor in constructing the hardware.can anyone help me plz...ur help will be apprreciated....

    thank you
  2. SgtWookie

    SgtWookie Expert

    Joined:
    Jul 17, 2007
    Messages:
    22,046
    Location:
    In the vast midwest of the USA; CST
    Without your schematic and source code being posted, we won't be of much help - just a lot of guessing.

    However, 30mh is a VERY large inductor, and 0.01pF is less capacitance than you would get with typical parasitic capacitance - it's really too small of a value to measure without an expensive material analyzer ($15,000 - $30,000 USD).

    Posting inaccurate values will not help either.
  3. sudheer9133

    sudheer9133 Thread Starter New Member

    Joined:
    May 19, 2011
    Messages:
    4
    hi
    thanks a lot for ur reply...i dont know how to calculate and which values for the components is use for my circuit ...can you please help me how to calculate the component values for the desired output for my project....below is my project diagram and suggest me with your tips

    thank you..

    Attached Files:

Similar Threads: need help
Forum Title Date
The Projects Forum Help needed: MOSFET gets hot when PWMing car highbeams as DRL lights Yesterday at 10:48 AM
The Projects Forum i need help for our project . Thursday at 1:46 AM
The Projects Forum Help needed? step-up Boost Aug 26, 2014
The Projects Forum Need help for NiMH battery charger Aug 26, 2014
The Projects Forum Need help repairing SMPS Aug 23, 2014

Share This Page