Need some help with wireless tx/rx Arduino project

Discussion in 'Wireless & RF Design' started by pityocamptes, Mar 16, 2016.

  1. pityocamptes

    Thread Starter Member

    Jul 25, 2012
    75
    0
    I am very new to this. I am trying to assist my son with a science fair project. The idea is to control a "dummy head" on basically a pan/tilt gimbal. We were able to make a headtracking unit with the nano and gyro module. We found some code and uploaded it, and tested it with the GUI that was made available with the DIY head tracker code and schematic.

    The next step is we would like to plug this head tracker unit (has a PPW signal wire) to a transceiver unit. The receiving end should be able to move the servos up/down - left/right as the user moves their head. It would also be nice to have a switch or push button on the transmitter box that turns a light on at the receiver end (son would like to light up the see through mannequin head). Any help is greatly appreciated. I can follow a schematic, but not so good at coding. Does anyone have a schematic for such a thing or point me in the right direction, or offer some guidance, help? Thank you!
     
  2. pityocamptes

    Thread Starter Member

    Jul 25, 2012
    75
    0
    Anyone? Could really use the help. Thanks.
     
Loading...