Need link for good digital techniques

Discussion in 'Electronics Resources' started by Tera-Scale, May 3, 2011.

  1. Tera-Scale

    Thread Starter Active Member

    Jan 1, 2011
    164
    5
    Hi folks,
    Does anybody have a good link on good tehniques to apply when prototyping with digital electronics like pull up/down resistors.. by pass cap.. etc ? thanks
     
  2. R!f@@

    AAC Fanatic!

    Apr 2, 2009
    8,734
    759
    Pull ups & downs can range from 1K to 10K.
    Bypass should be mostly a 100nF & a 1μF or sometimes a tantalum 1μ to 10μ, with proper voltage ratings.

    Digital ground and Signal grounds should be separate through out. And will be joined at a single point only. No multiple ground connections.
     
  3. beenthere

    Retired Moderator

    Apr 20, 2004
    15,815
    282
Loading...