Need help to identify

Discussion in 'General Electronics Chat' started by Dgrim67, Nov 7, 2012.

  1. Dgrim67

    Thread Starter New Member

    Nov 7, 2012
    3
    0
    Hi all I have a foxxconn video card and when I was taking it out of one computer and placing it into another I damaged a component on the card. I have tried to contact foxxconn to no avail. Attached is a picture of the component. If anyone knows what it is or where to get one please let me know. Thank you.
     
  2. panic mode

    Senior Member

    Oct 10, 2011
    1,319
    304
    which component we are talking about, i can see several... do you men inductor L16?
     
  3. Dgrim67

    Thread Starter New Member

    Nov 7, 2012
    3
    0
    Yes the component in L16. The other components I am assuming are either resistor's or diodes and 1 IC, but the component I am looking to identify is the one in the middle of the picture in L16. Thank you
     
  4. MrChips

    Moderator

    Oct 2, 2009
    12,429
    3,360
    Looks like a surface mount inductor.
     
  5. praondevou

    AAC Fanatic!

    Jul 9, 2011
    2,936
    488
    When looking at datasheets from other manufacturers "1R0" usually means 1uH.

    Go to digikey.com, search for inductor, filter for SMD, 1uH, Ferrite core. You should measure the dimensions of the one you have and then look for a similar one in the list from digikey.
    There are several options.

    Since this is quite big for 1uH I think it can carry more than 1A.
     
  6. Dgrim67

    Thread Starter New Member

    Nov 7, 2012
    3
    0
    Thank you very much. I will check out digikey.com.
     
Loading...