need help to build simple radar system

Discussion in 'The Projects Forum' started by bow_tucks, Jul 15, 2008.

  1.  
    bow_tucks

    bow_tucks Thread Starter New Member

    Joined:
    Jul 15, 2008
    Messages:
    1
    Location:
    malaysia
    i'm a student in electrical.i need help from someone that know about built a simple radar system using dsp and labview software.please someone help me to built this project because i'm really need help to finish my final project(psm).please..:).i do no anything about to built a radar.please help me.
  2.  
    roddefig

    roddefig Active Member

    Joined:
    Apr 29, 2008
    Messages:
    149
    Location:
    United States
    Take a look here: http://lea.hamradio.si/~s53mv/vnr/theory.html. This is one of my favorite electronics sites on the internet, because his projects are so good. Another project using a PIC is available here. However, I'm afraid there is no such thing as a simple radar.

    To build a radar from scratch you should know about programming, embedded processing, signal processing, radar theory, RF theory, and have the experience to put together a schematic and do a proper layout (which is not trivial).

    If you still want to try it, the best book on radar IMHO is George Stimson's "Introduction to Airborne Radar," though it covers only theory. Amazon link
Similar Threads: need help
Forum Title Date
The Projects Forum i need help for our project . Yesterday at 1:46 AM
The Projects Forum Help needed? step-up Boost Tuesday at 4:59 PM
The Projects Forum Need help for NiMH battery charger Tuesday at 12:04 PM
The Projects Forum Need help repairing SMPS Saturday at 6:55 PM
The Projects Forum help needed with a 12v circuit for a boat radio Aug 22, 2014

Share This Page