Need help on connecting radio-arduino-naze32

Discussion in 'The Projects Forum' started by Akadis, Aug 11, 2016.

  1. Akadis

    Thread Starter New Member

    Aug 11, 2016
    1
    0
    Hello guys,

    I have:
    • Frsky 9XR Pro Radio with a XJT Transmittor
    • X8R Reciever (16CH over sBus)
    • Naze32 Rev6
    • Arduino nano

    What I want to do:
    • for now: assign a switch on the radio to a led connected to the arduino
    • later: control stuff with the arduino over multiple switches maybe + a ground station with lcd status output/inputs

    These are the questions:
    1. How would I connect everything (basic shematic would be very nice)
    2. Do I need to change something on the receiver and what? (new to the RC buissness ^^)
    3. Maybe a small example code for the Arduino
    4. Is it possible to connect another arduino to the radio and transmitt data to the other one or am I better off adding another transmitter/reseiver for the Arduino connection?
    Thanks for the help guys
    Akadis
     
Loading...