Hahaha...will do! Thanks so much!
tracecom Joined Apr 16, 2010 3,944 Apr 29, 2013 #42 The TI datasheet says that grounding the strobe pin on the LM311 stops its output, so I think you are good.
The TI datasheet says that grounding the strobe pin on the LM311 stops its output, so I think you are good.
#12 Joined Nov 30, 2010 18,224 Apr 29, 2013 #43 I couldn't find that on the datasheet I have, so I studied the internals of the chip until I arrived at, "ground strobe = no drive current to the output transistor, therefore, it must be open collector". Still, I make misteaks, so I asked.
I couldn't find that on the datasheet I have, so I studied the internals of the chip until I arrived at, "ground strobe = no drive current to the output transistor, therefore, it must be open collector". Still, I make misteaks, so I asked.
tracecom Joined Apr 16, 2010 3,944 Apr 29, 2013 #44 #12 said: Still, I make misteaks, so I asked. Click to expand... We all due.
